If you own a car, you need to be much updated about theft issues. As technology advances, thieves have also found new ways through which they could access your car. Well, most of them utilize the locking mechanism to get away with your car. This is why you must be very careful with your keys. Car keys are easy to duplicate and so if you leave them laying anywhere, then you risk having more than one key in existence yet you only own one key. This puts your vehicle at risk. If you happen to lose your keys, then you may consider lock rekeying or replacing the locks all the same. You can click at azcarkeys.com to find these services. Lock rekeying involves altering the lock cylinder such that you are able to open the lock using a different key.
But is car locking that easy? While it is possible to rekey car locks, the job may not be that easy. This is because car locks where not made to be rekeyed like the residential locks. You must therefore engage the services of an expert for the job to be done effectively. You can click at https://www.youtube.com/watch?v=PP5gGug9qAQ to find out more information about lock rekeying.
Can you rekey your own car door locks? Well, in this part, we are going to look at how you can go about rekeying your car door locks by yourself. The first thing you need to do is to remove the lock and the tumbler. You will then need to adjust the settings of the tumbler so that the pattern is different from that of the current keys. You will then need to get a new pattern that you can open using a new key.
You will of course have a blank key that you need to create to be able to pen the lock. You will insert this blank key into the tumbler mechanism and then mark on where you will have to cut using a pen or a scribe. You can then go ahead to cut the key once you are sure you have made the right markings. You can use a dremel tool or jeweler’s file to cut the key. You must be patient enough to ensure you do not cut below the lines you have marked. You should keep fitting the key as you cut to ensure you do not overdo it.
Once you have cut the new key, you will need to test to ensure it can open with ease. You should therefore get back your lock and tumbler as they were. After you reassemble them, you can then check whether the new key will open the lock. If it opens, you will have successfully made a new key for your car door. However, if the lock does not open, then you will need to remove it again and then adjust the key or cut a new key.
Finally, once you have made the right key for the door lock, you will then need to adjust the pattern in the tumbler for the other doors so as to match the new key. You can then be sure that only your key exists and so your car is somehow safe.